Installing side steps on your Chevy Silverado is easy, even if you have no prior experience with automotive installation. With a simple step-by-step guide, you’ll be able to get the job done right the first time.

If you’re looking for a way to add extra safety and protection to your Chevy Silverado, you’ll want to install running boards. These accessories can give you a non-slip entry to your vehicle, a good lift, and added ground clearance. However, installing these items is more complex than it looks.

To install side steps on Chevy Silverado, you’ll need a jack and some tools. It’s also a good idea to have safety goggles and leather gloves on hand to prevent injuries. Also, you may need to remove the tray to get to the bolts.

The first step in installing running boards is to center your board. You will need to do these 3 inches back from your off road wheels opening. After you do this, tighten the bolts. Stay under-tightened. This can result in loose bolts.

The next step is to align the fender skid plate mounting brackets. The bolts will go into a large hole in your truck, and the washer and nut will go into a smaller hole. Make sure your brackets are securing the running board tightly.

Once your mounting brackets are secure, tighten the bolts. Be sure to do this one last time to ensure a tight fit.

Finally, you’ll need to find the right spot to mount the step. Most factory side steps have rubber plugs that go into holes under your doors. To find the right spot, you’ll need to remove the rubber plugs and try to locate a suitable spot.

 Chevy siverado side steps power

Running boards provide lift-up and protection from dents and scratches

When it comes to accessories, Chevy Silverado owners have many different options. These include floor mats, tonneau covers, and even seat covers. You can also add running boards to your vehicle.

Adding running boards to a vehicle can provide an extra step at the foot of the door and protect against dents and scratches. There are plenty of manufacturers to choose from, and it’s important to do your research to find the best option for your vehicle.

Depending on the model of your truck, you may be able to fit running boards. This is a great way to get a bit of extra ground clearance and make long rides or weekend trips easier. However, you should be careful where you mount the boards. You could damage your bumper or door if you’re unfamiliar with your vehicle’s mounting points.

  • Quick and easy process

The installation process is quick and easy. It should take you no more than an hour or two. Many companies offer easy-to-follow instructions. Just be sure to use the appropriate tools. Some trucks will require a jack stand to elevate the running board.

Fortunately, most vehicles come with a variety of brackets for installation. Most companies will engineer a kit to fit your specific model. They also offer plug-and-play solutions.

Running boards come in a wide range of styles. Some are designed to look like solid pieces of metal, while others are more upscale and made from carbon fiber, wood, and other materials. For the most part, they all provide the same benefits.

It’s possible to find the right running board for your Chevy Silverado. If you’re unsure what to choose, the first thing to consider is how tall your truck is. Most Silverado models are relatively tall, and you’ll want a board that can reach the floor. You might be better off sticking with a traditional sidestep if yours isn’t.

Unlike running boards, side steps are usually smaller. However, they are a popular accessory for many types of trucks and 26 inch 6 lug rims Chevy. Aside from providing a step, they can help you to get into your vehicle.

They’re easy to install

A great way to add an attractive touch to your Chevy Silverado is to install a set of side steps. They provide a comfortable stepping surface that makes getting into and out of your pickup easier. While there are several options to choose from, the best is the one that meets your needs.

When shopping for side steps, look for a product that is made of rugged aluminum. This material is durable and will withstand the weight of your vehicle. Finding a set that is wide enough to accommodate all passengers is also important.

  • Size and design

Another thing to consider is the size and design of the step pads. Wider pads are slip resistant and reliable.

  • Brackets

Another option is to install two or three brackets to make your side step more rigid. Brackets are universal, which can be installed on either the driver or passenger sides.

  • Quality 

Finally, be sure to purchase a quality aftermarket running board. These are easy to install and are backed by a manufacturer’s warranty.

The easiest way to install a set of side steps on your Chevy Silverado is to purchase a product with pre-drilled holes. Some companies offer a kit with all the necessary installation hardware, saving you time and effort.

  • High weight capacity

You should also take care to buy a running board that features a high weight capacity. Side steps that weigh only 300 pounds will not be able to withstand a heavy load. However, a product with a 500-pound weight capacity is worth considering.

side steps high weight capacity

Regardless of the model of the side step you purchase, it is important to remember that your truck’s body may need some modification to be able to support the weight. If your truck’s doors or frame require this, you may want to shop for a set that is designed to handle your specific needs.

If you need to install side steps on your Chevy Silverado, take the time to learn about your truck’s configuration before you begin the process. After all, you don’t want to spend much money on a product that won’t work.

They’re ruggedly built

Having ruggedly built side steps on your Chevy Silverado can make it easier for you to climb into your pickup. Whether you are doing a landscaping job or just getting your work done, these durable aluminum steps can handle any weight you put on them. Buying them right is important.

One of the most common and popular choices for side steps is those by TAC. They offer a wide range of options and are known for their high-quality design. Their steps can fit a variety of vehicle models.

If you are looking for a more stylish look, consider rocker bars. These are designed to give your truck a sharp look. You can find them in a variety of colors. Some even feature built-in LEDs to light up the step area.

You can also get running boards. These are flat, narrow, single steps that can be placed on one side of your vehicle. They are very similar to side steps but are usually used on larger vehicles.

While they are not as heavy-duty as the steps, they can still hold a lot of weight. A good-quality step board should be made from aluminum or steel. Heavy-duty performance is not cheap, but it helps to keep the overall weight down.

Finally, a great option for heavy-duty performance is the Bully BBS-1103. This sturdy and reliable model can support a huge amount of weight.

Regardless of which brand you choose, buying the correct ones for your Chevy Silverado is important. Purchasing the right step is vital to making climbing into your truck easier. Buying them right can mean the difference between getting the most out of your pickup and throwing them away.


Read Also: What Factors Influence a Truck’s Off-Road Performance?


They cost more

If you have a Chevy Silverado, you may want to consider getting side steps to improve your access to the cabin of your vehicle. There are several types of Side Steps for Chevy Silverado trucks, but you should keep a few things in mind.

The first thing you should keep in mind is the height. You should choose a step that is high enough to reach the top of the door but low enough to allow you to easily step into your truck. Another factor to consider is the grip. Make sure the step you choose is sturdy and secure, and you won’t have to worry about it falling off. Generally, the best step is steel which can take a heavy load.

The side steps on your Chevy Silverado will be installed in one of three ways: using a hitch, placing them in the front of the cabin, or through the cab. You can also install them by using a jack under the Cabin. Typically, the holes in your truck’s doors have built-in threading for bolts, but it’s a good idea to use rubber plugs. These plugs will help you find the right spot.


Finally, you should also consider whether you’d like to get a nerf bar to install in your Chevy Silverado. Nerf bars are available in various shapes and sizes, and you can choose the one that is most comfortable for you. Some Chevy Silverado nerf bars can be mounted in the front of the cab, making it easy to access your vehicle when climbing in and out. This will make it much easier to do your tasks while your truck is on the road.