Apart from the fact that they are easier to drive than manual, sometimes, they can be better on fuel and cost less to maintain. If you haven’t driven an automatic car before, it can be very easy for you to get behind the wheel and you may be completely confused by the lack of clutch pedals and the options provided by the shifter.

These simple steps will guide you in learning to operate an automatic transmission. but remember before operating any motor vehicle, you have a driving license and understand all local traffic laws.


1.      Adjust the Car Seat

Change the vehicle to your necessities. Change your seat toward any path you can/find vital so you can serenely arrive at any controls and see well out of the windows. Move the mirrors so you can see behind and in front of the vehicle. Distinguish the vehicle’s vulnerable sides before you begin driving so you can check them before making any turns or path changes.


2.      No Clutch Pedal

Automatics do have gears, yet the vehicle handles most stuff changes itself. That is the reason there’s no grasp pedal but simply there are brakes and the gas pedal.

Any off-road rims vehicle, manual or programmed, will be disturbed if you hit those two pedals simultaneously. So a great deal of ‘manual’ drivers folds their abandoned foot their right foot while they’re becoming acclimated to a program. In the event, their left foot fails to remember that it’s anything but a grasp on the left-hand side.


3.      Get Used to the Gearstick

Before you even turn the key, invest in some opportunity to become acclimated to the gearstick. You’ll only use it occasionally; you won’t contact the gearstick much in a program. yet when you truly do change gear, simply hold the brake down (like the grasp in a manual).

  • P – Park

Park is Neutral with the gears locked so the wheels can’t turn. Before starting the car make sure your car is in parking mode and return to parking mode before turning off the engine.

  • R – Reverse

Forgoing backward, of course.

  • N – Neutral

Stopping at lights or in traffic (for more than a couple of seconds)? Lots of automatic drivers put the car in Neutral. As with a manual car, it’s best to use the brake/handbrake to make sure you don’t roll.

  • D – Drive

Forgoing forwards. When your car is moving fast enough, it will automatically switch to second gear, then third, and so on.


4.      Choose your Gear

Choose your gear. The gear lever should be in “Drive.” This gear is marked with a “D” on the display panel and will be highlighted once you select it. If the shift lever is mounted on the steering column, pull the lever towards you before moving it up and down. When shift levers are mounted on the floor, there is usually a side button to unlock them. Afterward, it can be moved into position.


Read Also: 1996 Dodge Avenger Sporty Look Owner’s Manual


5.      Release the Parking Brake

There is either a lever between the two front seats or a pedal on the far left side of the footwell. On topside models, you may need to push a button before you can disengage the lower parking brake.


6.      Be Prepared to Move

Gradually discharge strain on the brake pedal and the off-road rim vehicle will begin to gradually move. Take your foot off the brake, utilize a similar foot to press the gas pedal tenderly, and the vehicle will start to move quicker. There is no need to switch gears about speed in standard street driving.


7.      Steering Wheel and Brakes

As mentioned by best offroad rims brand, In “Drive”, turn the car to the left to turn left and turn the car to the right to turn right. Place your right foot on the accelerator pedal and move it toward the brakes, applying pressure slowly so as not to shock. When you want to start the car again, switch your feet back to the accelerator.


8.      Park the Car in the Proper Way

When you have reached the destination at the end of your journey, gradually apply the brake pedal to bring the vehicle to a full stop and slide the shift lever back to the “P” position. Turn off the engine by turning the key counterclockwise. When getting out of the car, be sure to turn off the headlights first and apply the parking brake.


9.      Know what to expect in Various Circumstances

Learning to drive in an automatic car is certainly easier because there is no need to think about gears, drivers are free to focus on mirrors, speed, other cars, pedestrians, and so on. If you’re used to driving a manual, you’ll notice some differences on motorways, staying in Drive is the same as staying in top gear. Automatics are great when it comes to traffic jams. You don’t have to switch back and forth between first and neutral constantly. The ‘creep’ feature may come in handy when you’re parking. Or you might find it annoying.


10. Precautions About Car

While overtaking, driving up/down hills, or towing, some people find an automatic car doesn’t give them as much control as a manual. However, most older automatics have an ‘O / D’ (overdrive) button on the gear stick which gives the engine a little more ‘oomph’. And most of the newer models have all the features of when the driver needs more power and does not need these buttons.

Overdrive is a feature that keeps the revs down and the car uses less fuel. An automatic car will start with Overdrive on, so pushing the button turns it off – you’ll burn more fuel, but get more power/control.


Read Also: Pagani Interior Explained: How Four Materials Make the Pagani Huayra the Best


Final Result

Automated cars are becoming more and more popular over time due to their technology, ease of use, smoothness, and performance capabilities. The biggest advantage of this automatic transmission is that it automatically changes gears, which is not the case with manual cars. If you are interested in self-learning, it is better to go to a place and practice than to go on a busy road. Get into the habit of sticking your hand to the gear stick and your left foot out of the way when no one is around.